Working steps of 3D flexible welding platform

Working steps of 3D flexible welding platform：

Before using the 3D flexible welding platform,it is necessary to check whether the shelf life of the 3D flexible welding platform has expired and whether the surface accuracy of the 3D flexible welding platform is within the acceptable range.Using unqualified 3D flexible welding platform to measure the workpiece will directly affect the quality of the measured workpiece and maintain the deviation of the measured value.Therefore,it is necessary to inspect the 3D flexible welding platform frequently.Preparation before verification of 3D flexible welding platform;

1.Check whether the certificate of inspection fixture and main supporting equipment is in the period.If it is not in the period,it is not allowed to be used.Contact the maintenance personnel in time to check whether the inspection fixture is qualified.

2.Whether the temperature of the verification site of the 3D flexible welding platform meets the requirements of the verification regulations(20 5℃),if not,the air conditioner should be used to adjust the temperature of the verification site to meet the requirements.

3.Clean the surface of the inspected 3D flexible welding platform,and clean it with 120#solvent gasoline.

4,3D flexible welding platform verification tools in the verification site temperature balance time should be not less than four hours.

GB/T7714:Wang S, Li Z, Chen G, et al. Weld seam object detectionsystem based on the fusion of 2D images and 3D point cloudsusing interpretable neural networks[JJ. Scientific Reports,2024, 14(1):21137.

MLA:Wang, Shengbo, et al. "Weld seam object detection systembased on the fusion of 2D images and 3D point clouds usinginterpretable neural networks." Scientific Reports 14.1 (2024):21137.

APA:Wang, S., Li, Z., Chen, G., & Yue, Y. (2024). Weld seam objectdetection system based on the fusion of 2D images and 3Dpoint clouds using interpretable neural networks. ScientificReports, 14(1), 21137.