Company News-Hebei Yongxin Measuring Tools

What Is the Standard Hole Spacing for a Modular Welding Table

The standard hole spacing(center‑to‑center)for modular welding tables is 50 mm(2 in)and 100 mm(4 ...

2026-02-23

What is the effect of sand pressing on 3D welding platform?

The sand pressing effect of 3D welding platform directly affects the plane accuracy of gauge block,so...

2026-02-23

Selection method of 3D flexible welding platform

Selection method of 3D flexible welding platform： 1,if it is a batch purchase,it is necessary to ch...

2026-02-23

Methods to reduce casting defects of 3D welding platform

Methods to reduce casting defects of 3D welding platform： 1.The 3D welded platform castings should ...

2026-02-23

What accessories are needed for working face support of 3D flexible welding platform?

What accessories are needed for working face support of 3D flexible welding platform? 1. Locking piec...

2026-02-23

Working steps of 3D flexible welding platform

Working steps of 3D flexible welding platform： Before using the 3D flexible welding platform,it is ...

2026-02-23

Causes and solutions of common 3D welding platform problems

Causes and solutions of common 3D welding platform problems： 1.The 3D welding platform is prone to ...

2026-02-23

3D welding platform is prone to shrinkage porosity on the surface of castings. What should be done if

3D welding platform has been artificially annealed twice,and stress relief annealing is also called l...

2026-02-23

The influence of temperature difference in quality measurement of 3D welding platform is as follows

The influence of temperature difference in quality measurement of 3D welding platform is as follows: ...

2026-02-23

Measurement of datum profile of 3D welding platform

Measurement of datum profile of 3D welding platform： 1.Plan the datum plane of 3D welding platform....

2026-02-23

Corresponding solutions to problems of 3D flexible welding platform

Corresponding solutions to problems of 3D flexible welding platform： 1,the 3D flexible welding plat...

2026-02-23

What Is the Standard Hole Spacing for a Modular Welding Table

The standard hole spacing(center‑to‑center)for modular welding tables is 50 mm(2 in)and 100 mm(4 ...

2026-02-22