Blogs-Hebei Yongxin Measuring Tools

What Is the Standard Hole Spacing for a Modular Welding Table

The standard hole spacing(center‑to‑center)for modular welding tables is 50 mm(2 in)and 100 mm(4 ...

2026-02-23

What is the effect of sand pressing on 3D welding platform?

The sand pressing effect of 3D welding platform directly affects the plane accuracy of gauge block,so...

2026-02-23

Selection method of 3D flexible welding platform

Selection method of 3D flexible welding platform： 1,if it is a batch purchase,it is necessary to ch...

2026-02-23

Methods to reduce casting defects of 3D welding platform

Methods to reduce casting defects of 3D welding platform： 1.The 3D welded platform castings should ...

2026-02-23

Processing technology of 3D welding platform

3D welding platform is used for all kinds of inspection work,such as datum plane for measurement,insp...

2026-02-23

Inspection process of 3D welding platform

Inspection process of 3D welding platform： 1.On the two opposite sides of the 3D welding platform,t...

2026-02-23

What accessories are needed for working face support of 3D flexible welding platform?

What accessories are needed for working face support of 3D flexible welding platform? 1. Locking piec...

2026-02-23

Working steps of 3D flexible welding platform

Working steps of 3D flexible welding platform： Before using the 3D flexible welding platform,it is ...

2026-02-23

Operation,use and maintenance steps of 3D flexible welding platform

Operation,use and maintenance steps of 3D flexible welding platform： 1.In order to prevent the defo...

2026-02-23

Technical requirements of 3D flexible welding platform

Technical requirements of 3D flexible welding platform： 1.There shall be no defects such as sand ho...

2026-02-23

Causes and solutions of common 3D welding platform problems

Causes and solutions of common 3D welding platform problems： 1.The 3D welding platform is prone to ...

2026-02-23

3D welding platform is prone to shrinkage porosity on the surface of castings. What should be done if

3D welding platform has been artificially annealed twice,and stress relief annealing is also called l...

2026-02-23